Description
[Discontinued] Single-Axis CNC Stepper Motor Driver Controller, TB6600
DESCRIPTION
This drive adopts Toshiba TB6600HG driver chip, which runs smoothly, the motor is locked without noise, and the protection functions such as overcurrent, overheating, reverse connection, freewheeling, etc. Maximum output phase current 4.5A, input voltage 12-40VDC. It is a low-cost, cost-effective driver.
WHAT’S IN THE PACKAGE
- 1x TB6600 Single Axis CNC Stepper Motor Driver Controller
- 1x Manual Instruction
I/O Ports:
- DC+: DC power positive pole
- Note: Must guard against exceeding 45V, so as not to damage the module.
- DC-: DC power cathode
- A+, A-: Stepping motor one winding
- B+, B-: Stepping motor other winding
- PUL+, PUL -: Stepping pulse input+5V (Rising edge effective, rising edge duration >10μS)
- DIR +, DIR-: Stepping motor direction input, voltage level touched off, high level forward, low-level reverse
- ENA+ ENA-: motor free
- Typical Connection
Switch Choice:
- Micro-step choice:
|
Microstep
|
Plus/rev.(for 1.8°motor)
|
SW4
|
SW5
|
SW6
|
|
Standby
|
—–
|
OFF
|
OFF
|
OFF
|
|
1
|
200
|
OFF
|
OFF
|
ON
|
|
1/2(A)
|
400
|
OFF
|
ON
|
OFF
|
|
1/2(B)
|
400
|
OFF
|
ON
|
ON
|
|
1/4
|
800
|
ON
|
OFF
|
OFF
|
|
1/8
|
1600
|
ON
|
OFF
|
ON
|
|
1/16
|
3200
|
ON
|
ON
|
OFF
|
|
Standby
|
—–
|
ON
|
ON
|
ON
|
- Current choice:
|
Peak current
|
SW1
|
SW2
|
SW3
|
|
0.6A
|
OFF
|
OFF
|
OFF
|
|
1.2A
|
ON
|
OFF
|
OFF
|
|
1.8A
|
OFF
|
ON
|
OFF
|
|
2.3A
|
ON
|
ON
|
OFF
|
|
2.8A
|
OFF
|
OFF
|
ON
|
|
3.3A
|
ON
|
OFF
|
ON
|
|
3.8A
|
OFF
|
ON
|
ON
|
|
4.5A
|
ON
|
ON
|
ON
|
Shell Dimension:
