Description
[Discontinued] Owon HDS1022M-N Handheld 20 mhz 2 Channel Digital Storage Oscilloscope & Multimeter TrueRMS AC
Description:
The HDS1022M-N is a 2 channel handheld Digital Storage Oscilloscope and Multimeter with 20MHz bandwidth, 100MS/s sample rate, and 3,7 inches (640×480) color TFT-LCD screen. It includes 2 DSO probes, 2 Multimeter probes, USB cable, software CD, power adapter, user manual, lithium battery (4 hours operation time) and a Soft-bag.
Features:
- 2 in 1(DSO+Multimeter)
- Autoscale
- FFT
- 20 automatic measurements
- Bandwidth: 20MHz-100MHz
- Support USB for data transmission to PC
- Replaceable li-ion battery back up (6 hours)
- USB flash disk storage
- Waveform record & replay(HDS2062M-N, HDS3102M-N)
- Dimension: 180mm(L)×115mm(H)×40mm(W)
Application:
- Electronic circuit debugging Circuit testing
- Design and manufacture
- Education and training
- Automobile maintenance and testing
Specification:
| Model Name | HDS1022M-N | HDS2062M-N | HDS3102M-N | |
| Bandwidth | 20MHz | 60MHz | 100MHz | |
| Sample Rate ( Real time ) | 100MS/s | 250MS/s | 500MS/s | |
| Horizontal Scale(S/div) |
5ns/div~100s/div step by 1~2.5~5 |
5ns/div~100s/div step by 1~2~5 |
||
| Rise time(at input, typical) | �7.5ns | �.8ns | �.5ns | |
| Display | 3.7 inch color display with TFT panel(640×480 pixels, 65535 colors) | |||
| Channels | Dual | |||
| Record length | Max. 6000 points on each channel | |||
| Interpolation | (sin x)/x | |||
| Probe attenuation factor | 1X, 10X, 100X, 1000X | |||
| Input coupling |
DC, AC, GND |
|||
| DC accuracy(Average) | Average>16:±(5% reading+0.05div) for ΔV | |||
| Vertical Sensitivity | 5mV/div~5V/div (at input) | |||
| Vertical resolution (A/D) | 8 bit(2 channels simultaneously ) | |||
| Max. Input Voltage | 400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1) CAT II | |||
| Trigger Type | Edge, Video, Alternate | |||
| Trigger Mode | Auto, Normal, Single | |||
| Trigger level | ±6 divisions from screen center | |||
| Acquisition modes | Sample, Peak Detect and Average | |||
| DC gain accuracy | ±3% | |||
| Automatic Measurement |
Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot ,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B, Delay A→B |
|||
| Waveform math | +, -, ×, ÷, FFT | |||
| Waveform storage | 4 waveforms | |||
|
Lissajou’s figure |
Bandwidth | 20MHz | 60MHz | 100MHz |
| Phase difference | ±3 degrees | |||
| Communication interface | USB | |||
| Power supply | 100V-240V AC, 50/60Hz | |||
| Li-ion battery | 7.4V, 6 hours operation | |||
| Multimeter specifications | |||
| Full scale reading | 3 3/4 digits (Max.4000-count) | Diode | 0V-1.5V |
| Input Impedance | 10 MΩ | On/Off measurement | <50(±30) beeping |
| Capacitance | 51.2nF-100uF:±(3%±3 digit) | ||
| Voltage |
VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V, 400V:±(1±3digit) Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value) |
||
| Current |
DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit) |
||
| Impedance | 400Ω:±(1%±3digit), 40Ω | ||
| General specifications | ||
| Interface | USB Data Cable (Transfer waveform data to a PC) | |
| Power |
Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA Battery: 6 hours |
|
| Dimension | 180mm x 115mm x 40mm | |
| Weight | 645g | |
Package includes:
1x HDS1022M-N handheld digital storage oscilloscope.
2x 1:1/1:10 passibe probe.
1x probe adjust pen.
1 pair of multimeter leads.
1x small capacitance measurement module.
1x power supply (charges the battery as well).
1x USB cable.
1x Drivers CD.
1x Instruction manual.
1x Soft-bag.
