Description
[Dsincontinued] SainSmart ABS Like 405nm UV-Curing Rapid Resin, Low Odor, 500g
SainSmart ABS-Like Tough Resin
Recommended Printing Settings:
- Applicable Wavelength: 395-405nm
- Recommended Operating Temperature: 18-35 ° C
- Exposure time: 8s
- Bottom Exposure Time: 20s-30s
Parameters:
- Density (g/m3) :1.10-1.15
- Viscosity: 200-300 (25℃ MPa·s)
- Hardness (Shore D): 81
- Tensile Strength (Mpa) : 55-60
- Elongation at break(%): 30-50%
- Flexural Strength (Mpa): 70-80
- Flexural Modulus (Mpa) : 1300-1400
Note：
- Please shake well before print.
- Keep your room well-ventilated while printing.
- Do not touch the resin without wearing PPE.
- Keep resins sealed tightly in the bottles, out of direct sunlight and within 15℃ – 35℃.
- Do not expose resins to heat, flames, sparks or any source of ignition.
|
|
|
|
|
|---|---|---|---|
|
Excellent Mechanical Properties SainSmart ABS-Like Tough Resin excels in its impact strength, shock resistance, hardness, tensile strength, bending strength, and wear resistance. |
Heavy-duty Aluminum Bottle Instead of commonly used plastic bottles, SainSmart uses solid, leak-proof, and airtight aluminum containers for the resin to prevent dent and breakage. |
Fast Modeling Improved raw components grant the resin with excellent fluidity, speeding up your 3D modeling, and delivering the great performance of the printed parts. |
Versatility With its excellent mechanical, it opens up the possibility for a new range of prototyping and engineering use. |
